Pentax H01-201106 Digital Camera User Manual


 
51
Getting Started
2
6
Press the four-way controller (3)
to select [Settings complete], and
press the 4 button.
The camera switches to Capture mode
and is ready to take a picture.
If you set the date and time from the
menu, the screen will return to the
[R Set-up 1] menu. In this case, press the 3 button.
Pressing the 3 button while setting the date and time cancels the settings
made up to that point and switches the camera to Capture mode. After initial
settings are complete, if the camera power is turned off before the date and
time settings are complete, the [Date Adjustment] screen will appear first the
next time you turn the camera on. You can also set the date and time from the
menu later. (p.187)
When you press the 4 button in Step 6, the seconds value is set to 0. To
set the exact time, press the 4 button when the time signal (on the TV,
radio, etc.) reaches 0 seconds.
You can change the language and date and time settings from the menu.
(p.187, p.190)
Date Format
Date Format
Date Adjustment
Date Adjustment
Date
Date
Time
Time
Settings complete
Settings complete
24h
24h
05/05/2011
05/05/2011
10:00
10:00
mm/dd/yy
mm/dd/yy
Cancel
Cancel
OK
OK
OK
MENU