Pentax K-01 Digital Camera User Manual


 
139
Shooting Settings
5
1
Press the M button in standby mode.
The control panel appears.
2
Use the four-way controller (2345) to select [Distortion
Correction] or [Lat-Chromatic-Ab Adj], and press the 4
button.
The [Distortion Correction] or [Lat-Chromatic-Ab Adj] screen appears.
3
Use the four-way controller (45)
to select [Off] or [On].
4
Press the 4 button.
The camera returns to the control panel.
Corrections can only be made when using DA, DA L, D FA or some FA
lenses. [Distortion Correction] and [Lat-Chromatic-Ab Adj] cannot be
selected when an incompatible lens is attached. (p.232)
The Distortion Correction function is disabled when a DA FISH-EYE 10-
17mm is used.
The Lens Correction function is disabled when using an accessory such as a
close-up ring or rear converter that is attached between the camera and the
lens.
The shooting speed for Continuous Shooting may be slower when using the
Distortion Correction function.
The effects of the Lens Correction function may be barely noticeable in some
cases due to the shooting conditions or other factors.
When a compatible lens is attached and the file format is set to [RAW] or
[RAW+], the correction information is saved as a RAW file parameter and you
can select [On] or [Off] when developing the RAW images. (p.175)
You can also set [Distortion Correction] and [Lat-Chromatic-Ab Adj] in [Lens
Correction] (p.69) of the [A Rec. Mode 1] menu.
Distortion Correction
Distortion Correction
On
On
OK
OK
OK
Cancel
Cancel
MENU