Filter
Top Products
190
Changing Additional Settings
7
You can change the language in which the menus, error messages, etc.
are displayed.
Set in [Language/u] of the [R Set-up 1] menu.
1Setting the Display Language (p.50)
Sets the monitor display when the standby mode display is set to
[Standard Information Display] or [No Information Display].
1
Select [Live View] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Live View] screen appears.
2
Press the four-way controller
(5), use the four-way controller
(23) to select a grid display
type, and press the 4 button.
Select from
e
(4x4 Grid),
f
(Golden
Section),
g
(Scale) or
h
(default setting).
3
Press the four-way controller (23) to select [Histogram
Display] or [Bright/Dark Area], and use the four-way
controller (45) to select O (On) or P (Off).
4
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
Setting the Display Language
Setting the Monitor and the Menu Display
Setting the Standby Mode Display Method
Histogram Display Shows the brightness distribution of an image. (p.28)
Bright/Dark Area
Bright (overexposed) portions blink red and dark
(underexposed) portions blink yellow. (p.29)
MENU
Show Grid
Show Grid
Histogram Display
Histogram Display
Bright/Dark Area
Bright/Dark Area
Live View
Live View
MENU
Cancel
Cancel
OK
OK
OK