Filter
Top Products
53
Getting Started
2
6
Press the four-way controller (3)
to select [Settings complete], and
press the 4 button.
The camera is ready to take a picture.
If you set the date and time from the
menu, the [R Set-up 1] menu reappears.
In this case, press the 3 button.
Pressing the 3 button while setting the date and time cancels the settings
made up to that point and switches the camera to capture mode. After initial
settings are complete, if the camera power is turned off before the date and
time settings are complete, the [Date Adjustment] screen will appear the next
time you turn the camera on. You can set the date and time from the menu
later. (p.187)
• When you press the 4 button in Step 6, the seconds value is set to 0. To
set the exact time, press the 4 button when the time signal (on the TV,
radio, etc.) reaches 0 seconds.
• You can change the language and date and time settings from the menu.
(p.187, p.190)
Cancel
Cancel
MENU
Date Adjustment
Date Adjustment
Date Format
Date Format
Date
Date
Time
Time
mm/dd/yy
mm/dd/yy
24h
24h
02/02/2012
02/02/2012
10:00
10:00
Settings complete
Settings complete
OK
OK
OK