Filter
Top Products
Before Using Your Camera
1
19
5 Focus mode switch
Changes the focus mode.
(p.92)
6 d (Green) button
You can assign a function to
this button. (p.147)
In this manual, this button is
referred to as the
d
(G) button.
7 K/i (Flash pop-up)
button
Press to pop up the built-in
flash. (p.63)
8 E-dial
Sets the shutter speed,
aperture, and EV
compensation values. (p.81)
You can change the menu
when a menu screen is
displayed. (p.34)
You can change the settings
when the control panel is
displayed. (p.33)
9 m/c button
Press to set the EV
compensation and aperture
values. (p.82, p.84)
Turn the e-dial after or while
pressing the m/c button to
change the settings.
0 d (Red) button
Press to record movies. You
can also assign a function to
this button. (p.118, p.147)
In this manual, this button is
referred to as the
d
(R) button.
a =/L button
You can select the function of
this button either to focus on the
target or to lock the exposure
value. (p.87, p.96, p.152)
b N button
Switches to playback mode.
(p.64)
c M button
Displays the control panel.
Press again to change the
type of information displayed
in standby mode. (p.22)
d 4 button
When the control panel or a
menu screen is displayed,
press this button to confirm
the selected item.
When [Autofocus Method] is
set to G (Select), press this
button to start and end
selecting the autofocusing
(AF) area. (p.94)
When the camera is in \
mode or when the focus is
locked, press this button to
magnify the image on the
monitor. (p.95)
e Four-way controller
(2345)
Displays the Sensitivity/White
Balance/Flash Mode/Drive
Mode setup menu. (p.68)
When the control panel or a
menu screen is displayed, use
this to move the cursor or
change the item to set.
f 3 button
Displays the [A Rec. Mode 1]
menu (p.69). Press this button
while the menu screen is
displayed to return to the
previous screen. (p.33)