Filter
Top Products
141
9
Appendix
Messages
Messages such as the following may appear on the LCD monitor during
camera operation.
Battery depleted
The batteries are exhausted. Replace with new batteries. If
using rechargeable batteries, charge the batteries. (p.18)
Built-in memory full
The built-in memory/SD Memory Card is full and no more
images can be saved.
Insert a new SD Memory Card or delete unwanted images.
(p.22, p.94)
Change the quality level or recorded pixels of recorded
images and try again. (p.100)
Memory card full
Memory card error
Shooting and playback are impossible due to a problem
with the SD Memory Card. You may be able to display or
copy the images on the card using a PC.
Card not formatted
The SD Memory Card you have inserted is unformatted or
has been formatted on a computer or other device and is
not compatible with this camera. Format the SD Memory
Card in the camera. (p.121)
Card locked The SD Memory Card is write-protected. (p.24)
Compression error
This message appears when compression of images has
failed. Change the quality level/size and record or save
again.
No image/sound There are no image/sound files on the SD Memory Card.
Deleting
This message appears when the camera is deleting an
image or sound file.
Camera cannot play this
image and sound
You are trying to play back an image or sound in a format
not supported by this camera. You may be able to play it
back on another brand of camera or your computer.
Image folder could not
be created
The largest file number (9999) has been assigned to an
image in the largest folder number (999) and no more
images can be saved. Insert a new SD Memory Card or
format the card. (p.121)
Protected The image or sound file you are trying to delete is protected.
Data being recorded
This message appears when you try to switch to Q mode
while an image is still being recorded, or when the protect
setting or DPOF setting is being changed. It disappears
after the image is recorded or the setting is changed.
Data being processed
This message appears when the camera takes more than
five seconds to display an image due to image processing,
or when the SD Memory Card or built-in memory is being
formatted.