Pentax Optio E50 Digital Camera User Manual


 
26
1
Getting Started
Turning the Camera On and Off
1
Press the power switch.
The LCD monitor turns on and the lens extends. The camera turns on
in A mode (Capture mode).
If [Language/ ] screen or [Date Adjust] screen appears when you
turn on the camera, follow the procedures on p.28 to select the display
language and/or set current date and time.
2 Press the power switch again.
The LCD monitor turns off, the lens closes, and the camera turns off.
The memory card is checked automatically
when the camera turns on.
+
appears on the
LCD monitor when there is no SD Memory Card
inserted in the camera. In this case, images and
sound files will be saved in the built-in memory.
r
appears instead of
a
when the write-protect
switch on the SD Memory Card is in the locked
position. Images and sound cannot be recorded
when the write-protect switch is locked.
Turning the Camera On in Capture Mode
Checking the Memory Card
If the batteries have been removed from the camera for a long time, when they
are reinserted and the camera is turned on, the message [Battery depleted] may
appear. This can also happen when using the camera for the first time; however
this is not a malfunction. Turn the camera off, wait a minute and then turn the
camera on again to reset the camera. The date and time and other settings may
also be reset. Follow the procedure on p.29 to set these settings again.
Power switch
Q button
38
38
38
02/02/2008
02/02/2008
14:25
14:25
Memory status