Filter
Top Products
49
Taking Pictures
4
You can set the shutter speed and aperture value manually.
1 Select b on the [A Rec.Mode] menu and press the
four-way controller (
5).
2 Press the four-way controller (23) to select M.
3 Press the OK button and then the MENU button.
4 Set the mode dial to b.
The camera is ready to take pictures in the Manual Exposure mode.
5 Use the four-way controller to
change the shutter speed and
aperture value.
4 Increases the shutter speed.
5 Reduces the shutter speed.
2 Makes the aperture larger.
(Reduces the aperture value.)
3 Makes the aperture smaller.
(Increases the aperture value.)
If the combination of shutter speed and aperture value do not give an
appropriate exposure, a warning will be displayed.
Setting the Exposure Manually (Manual Exposure Mode)
(Lit)
If the deviation from the appropriate exposure is between –0.3 EV
and –2.0 EV, n will light, and if between +0.3 EV and +2.0 EV m will
light, and the value will be displayed.
(Blinking)
If the picture is underexposed at a setting lower than –2.0 EV,
n blinks, and if overexposed at a setting higher than +2.0 EV,
m blinks.
p (Lit) Metering is not possible.
Mode dial
Four-way controller
OK button
MENU button
7/ 7/2004
7/ 7/2004
3:00 PM
3:00 PM
1/13
1/13
F3.2
F3.2
046
046
3:00 PM
7/ 7/2004
1/13
F3.2
046
Aperture Shutter speed