Filter
Top Products
74
Taking Pictures
4
You can take pictures automatically with three different exposure, white
balance, sharpness, saturation and contrast settings.
1 Press the gh button in the Capture mode to display a
on the LCD monitor.
[Auto Bracket] is set to On by default. However, when the setting is
changed to Off, a will not appear even if you press gh button. Set
[Auto Bracket] to On in the [ARec. Mode] menu in this case.
2 Press the shutter release button.
The bracket shooting will start. The Bracket Shooting screen appears
when the shooting is finished.
Automatically Changing the Shooting Conditions
(Auto Bracket)
• Check the pictures you have taken using the Playback mode.
• The flash will not discharge when [Exposure] is selected for the
bracket shooting condition.
• In bracket shooting, the shooting will start from the standard value
setting. Then the camera shoots with the [Negative (–)] and
[Positive (+)] value.
• You cannot add the voice memo to the image shot in bracket
shooting.
• Bracket shooting is not possible in the
C F or G mode.
MENU
AWB
AUTOAUTO
2560
Rec. Mode
Recorded Pixels
Quality Level
White Balance
Sensitivity
Exit SIMPLE
AE Metering
Focusing Area
MENU
MENU button
OK button
gh button
Shutter release
button
Four-way controller