Filter
Top Products
8. Camera setup --- OSD functions
For the version with Power Zoom, many functions are available to users for setup
and fine tune through controllers. To access the functions and make adjustment,
follow the instructions on below:
(NOTE: all the procedure in this paragraph is NOT applied to the version of vari-focal lens)
8.1 OSD operation
1. To initiate the OSD setup function, exercise “preset 88” ( a simulated function
call) at keyboard. Due to the procedure may vary from one keyboard to
another, please read the keyboard manual first.
2. After menu is displayed, use up and down controls (joystick or arrow keys)
to locate the target item. The under-seized item will blink, and screen will
move to next or previous page if moving forward over the end.
3. When the item is captured, move joystick to the right-hand direction or press
the “right” button (normally is marked as ►) to confirm setting and update
memory, or enter the sub-menu.
4. To exit menu, move joystick to left-hand direction, or press the “left” button
(sometimes is marked as ◄) in each pag
e.
5. To close the OSD control, exercise “call preset number 88” again.
Warning:
OSD setup and control are relatively sophisticated. To make proper adjustments, it
is suggested to consult with the original installer or experienced technician.
In case of getting lost or mess in setting, find the “Default” option, activate it and
you will retrieve the factor settings and get back to the original status.
In the next page there will be more information about what are available for camera
setup through OSD, and how to do.
8.2 OSD function List
Total 30 items are included in the OSD menu. Each has two or multiple sub-items
for selection or adjustment. All functions are listed in the tables on next page:
. .
User’s manual 37