Filter
Top Products
20
Changing the LCD Monitor Display
The type of information displayed on the LCD monitor can be changed using the button. Press the
button repeatedly to change the LCD display from one type to another. In Photo Mode, the LCD display can
be changed into any of the following:
• Basic
• Full
• None
• Guideline
• The OSD information may vary depending on the record mode type.
• The following icons, if enabled, are still displayed on the LCD even when OSD off or
Guide lines on: AEB, Face tracking, AF lamp, Drive mode, and Focus.
• Use the "Guide lines" to properly set image for capture.
In Playback mode, the LCD display can be changed into any of the following:
• Basic
• Full
• None
LCD display cannot be changed in the following situations:
• Adjusting Aperture value/Shutter speed under Manual exposure mode.
• Adjusting Aperture value under Aperture Priority mode.
• Adjusting Shutter speed under Shutter Priority mode.
• Recording video or audio clips.
• Playing video or audio clips.
• Playing slideshow.
Recording Images, Videos and Voices
Taking Images
Now that you are familiar with your camera, you are now ready to take your images. Taking images with
your camera is very simple.
1. Turn on the camera by pressing the Power button.
2. Frame the shot using the focus bracket on the LCD monitor.
See illustration on the right.
3. Pressing the Shutter button down halfway automatically
focuses and adjusts the exposure, and pressing the Shutter
button down fully captures the images.
When the shake warning icon
appears, hold the camera
steadily, with your arms at your side or use a tripod to stabilize
the camera to prevent blurred images.