Filter
Top Products
EN-19
Setting the Self-timer
This setting allows images to be captured with self-timer.
1. Toggle the e button to select the setting.
Each press of the e buttton moves the icon one step through the sequence and
displays it on the screen.
2. Compose your image in the LCD display.
3. Press the shutter button.
The self-timer LED flashes and the camera beeps (if beep is turned on). The
image will be captured after the preset time has elapsed.
The countdown is displayed on the LCD screen.
To cancel the self-timer during operation, press the OK button or shutter button.
The table below will help you to choose the appropriate self-timer mode:
The "10+2 sec." self-timer function cannot be used in the following capture modes: [
T
], [
U
],
[
/
], [
.
], [
+
] ,[
,
] and [ ].
The self-timer setting is automatically cancelled after an image is captured.
Self-timer mode Description
[
e
2s
] 2 sec. The image is captured about 2 seconds after the shutter is
pressed.
[
e
10s
] 10 sec. The image is captured about 10 seconds after the shutter is
pressed.
[
e
10+2s
] 10+2 sec. The first image is captured about 10 seconds after the shutter
button is pressed, and then a second image is captured 2 seconds
later. The 10+2 mode is convenient when capturing group images
in succession.