Filter
Top Products
EN-25
Protecting Images
To prevent images from accidentally being erased, follow the steps below:
1. Toggle the button to [ 7 ].
2. Select the image that you want to protect with the e /
f buttons.
3. Press the button.
4. Select [Protect] with the c / d buttons, and press the
OK button.
5. Select [Single] or [All] with the c / d buttons, and
press the OK button.
6. Select [Set] with the c / d buttons, and press the OK
button.
Protection is applied to the image and the camera
returns to the playback mode.
The protect icon [
t
] is displayed with protected
images.
When [All] has been selected, [ t ] is displayed
on all the images.
Canceling the Protection
To cancel protection for only one image, display the
image on the LCD display you want to remove the
protection.
1. Select [Protect] with the c / d buttons from the
playback menu, and press the OK button.
2. Select [Single] or [All] with the c / d buttons, and press the OK button.
3. Select [Cancel Protect] with the c / d buttons, and press the OK button.
The removal of image protection is executed and the camera returns to the
playback mode.
Formatting an SD/SDHC memory card overrides protection, and erases all images regardless of
their protected status.
:Exit OK:Adj.
:Exit OK:Enter
:Exit OK:Enter