Filter
Top Products
EN-32
Capture Mode
This sets the recording method at the time of capturing images.
LCD Bright.
Adjust the brightness level of the LCD display to your desired setting.
The LCD becomes brighter with the c button and darker with the d button. The adjust
ment range is from -5 to 5.
Date Print
The date the image was captured will be printed on it. This function must be activated
before the image is captured.
* On / Off
* [Blank] Single: Captures one image at a time.
* [ T ] Continuous: Permits continuous capture of up to 3. The flash is disabled in this
mode.
* [ U ]
AEB (Automatic Exposure Bracketing): Permits 3 consecutive images taken in
the following order; standard exposure, underexposure and overexposure
compensation.
* [ / ] Burst: Permits continuous photography while pressing and holding the shutter
button. As long as you hold the shutter button pressed, images are captured
until the memory capacity is full.
* [ . ] Series+flash: Permits continuous capture of up to 3 images with flash.
* [ + ] Pre-Shot: Lets you capture the background first, then have someone to capture
you in front of it. Refer to the section in this manual titled “
Recording a Subject
onto an Existing Background Image
” for further details.
* [ , ] Couple Shot: Uses a "split-screen" feature to combine two shots. You can
include yourself in the shot.
Refer to the section in this manual titled
“
Combining Shots of Two People into a Single Image ” for further details.