Filter
Top Products
v4.0
LDK 5481 + LDK 4700 User’s Guide | DigiLink Adapter 2-12
2.7.3 Multicore connector
Figure 2-7. Multicore connector
1
11
10
12
14
B
16
17
18
21
22
A
23
24
19
20
15
13
8
9
2
7
6
4
5
3
A.+ Battery from VTR (+10.7 to +17V)
B.- Battery Ground
1. SDI
2. SDI Return
3. Y Return
4. Y
5. Pr: NTSC 700mV 75% saturated colour bar
Cr: PAL 525mV (EBU N10)
6. Pr/Cr Return
7. Pb: NTSC 700mV 75% saturated colour bar
Cb: PAL 525mV (EBU N10)
8. Pb/Cb Return
9. Cam. Mic. X
10. Cam. Mic. Y
11. Cam. Mic. shield
12. VTR start/stop: +5V = recording; 0V = stop
13. Batt. alarm
14. Power sense
15. Record/Tally
16. Genlock Video/BB return
17. Cable shield (Camera GND to VTR GND)
18. Playback video / Ext. VF
19. Playback video return / Ext. VF return
20. VTR Save
21. Genlock Video/BB
22. Spare
23. RXD, control
24. TXD, control
26-pin male; panel view
Panel part number: (X6) 3922 040 02571
This multicore connector can be used to
connect either a recorder or a base unit
(LDK 4700/10).
When connected to a recorder it provides the
video outputs, control signals and the camera
microphone signal. DC power can also be
supplied to the camera via this connector.
The connector accepts a playback video signal
for display in the viewfinder. The start/stop
control signal for an external recorder is also
passed via this connector.