Filter
Top Products
v4.0
LDK 5481 + LDK 4700 User’s Guide | DigiLink Adapter 2-15
2.7.9 DC power output socket
Figure 2-13. DC power and tally output connector
2.7.10 DC power input socket
Caution
The input voltage must not exceed +17 Vdc.
Figure 2-14. DC power input connector
4
1
2
3
1. Power ground
2. On air (+5V, 100 Ohm)
3. Housing
4. +12 Vdc (max. 18W)
Shield of cable directly to the connector housing.
The socket provides access to an internal tally switch.
When the camera is on-air, the contact of the internal
relay is closed.
Hirose 4-pin female; panel view
Panel part number: (X3) 2422 026 04675
4
1
23
1. Power ground
2. -Batt sense
3. +Batt sense
4. +10.5 Vdc . . . +17 Vdc
This socket accepts a DC voltage of 12V nominal.
Maximum power consumption 60W.
XLR 4-pin male: panel view (X7)