Filter
Top Products
v4.0
LDK 5481 + LDK 4700 User’s Guide | Base unit 3-10
3.3 Controls and indicators
Figure 3-1. DigiLink base unit controls
3.3.1 Powering the base unit
Set the power switch to the on position (I). The power on indicator in the switch lights
when the unit is powered.
3.3.2 Indicators
Table 3-2. Ready indicator
Table 3-3. On-Air indicator
3.3.3 Set-up items
There are five items that can be accessed via the set-up buttons:
• Camera number (CA)
• Subcarrier adjustment (SC)
• H-phase (HP)
•Status (ST)
• Menu Off (OF)
Ready
On-air
Mains
DigiLinK - BASE UNIT
LDK 4700
Power switch
and indicator
Set-up
buttons
On-air
indicator
Display
Ready
indicator
indication description
off no camera video signal detected.
green (OK) camera video signal detected.
flashing yellow no camera video signal detected and power failure or fan
failure.
flashing yellow/green camera video signal detected and power failure or fan
failure.
indication description
On The camera is on air.
Off The camera is not on air.