Filter
Top Products
Powering Your Camcorder
16
To Attach the Adapter/Charger
1. Plug one end of the DC power cord into the
DC OUT jack on the adapter/charger.
2. Plug the other end of the DC power cord into the
DC IN 6.5V jack on the back of the camcorder.
3. Plug the adapter/charger’s plug into the nearest
AC outlet (100-240V, 50/60Hz).
4. If the adapter/charger is properly connected, its
POWER indicator will light.
POWER
CHARGE
REFRESH
ON
POWER
SAVE
DC IN 6.5V
START/
STOP
REC
ADJ.
POWER
DATE/TIME RES. MEM
COUNTER
OPEN
To Remove the Adapter/Charger
1. Unplug the adapter/charger from the wall outlet.
2. Disconnect the DC power cord from the
camcorder and the adapter/charger.
Using the Adapter/Charger to Power Your Camcorder
The adapter/charger attaches to the camcorder and lets you power your camcorder directly from
standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be
used virtually anywhere in the world to power the camcorder or recharge the battery. You may
need a plug adapter in some countries. Consult your RCA dealer. Be sure to purchase the plug
adapter before traveling. The adapter can be hard to find in foreign countries.
Using an optional plug adapter
An optional plug adapter may be required in some
countries.
1. Plug the adapter/charger’s plug into the AC plug
adapter.
2. Plug the AC plug adapter into an AC outlet.
AC Plug
Optional AC
Plug Adapter
DC IN 6.5 V Jack
DC Power Cord
To AC 110-240V, 50/60 Hz
POWER Indicator
DC OUT Jack
AC 200-240V