Filter
Top Products
1
Your video camcorder’s AC adapter/charger will operate on 100-240 volts AC, 50/60 Hz, and has a polarized
plug. Because one blade of the plug is wider than the other, the plug fits in the wall socket only one way.
Do not defeat the safety feature of this plug. If you need an extension, use a polarized cord.
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
MISE EN GARDE: Pour prévenir les chocs électriques, introduire la lame la plus large de
la fiche dans la borne correspondante de la prise et pousser jusqú au fond.
CAUTION: To reduce the risk of electric shock, do not remove the cover or back. No user-serviceable
parts are inside. If you spill liquid on the camcorder or AC adapter/charger, disconnect the AC
adapter/charger’s power cord to prevent possible fire or shock hazard and consult authorized service
personnel. Moisture can damage internal parts. Refer all service to Authorized RCA Compact Camcorder
Servicenter personnel only.
Caution: Maintain electrical safety. Powerline-operated equipment or accessories connected to this unit
should bear the UL listing mark or CSA certification mark on the accessories themselves and should not have
been modified so as to defeat the safety features. This will help avoid any potential hazard from electric
shock or fire. If in doubt, contact qualified service personnel.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
MISE EN GARDE
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
The symbol of a lightning flash within
a triangle is intended to alert the user
to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure and which may be
of sufficient magnitude to constitute a
risk of electric shock.
An exclamation point within a triangle is
intended to alert the user to the presence
of important operating and maintenance
(service) instructions in the literature
accompanying the product.
FCC Warning: Any unauthorized changes or modifications to this equipment may void the user’s
authority to operate.
Caution: The unauthorized recording of television programs and other materials may infringe the
rights of others.
Caution: Avoid operating your camcorder immediately after moving it from a cold location to a
warm location. Give the camcorder 1-1/2 to 2 hours to reach a stable temperature before inserting a
video cassette. When moved from a cold area to a warm location, moisture may condense on the head
drum inside the machine. This moisture could cause the tape to stick to the headwheel and damage the
headwheel or tape.
WARNING: To prevent fire or shock hazard, do not expose camcorder or AC adapter/charger to rain
or moisture.
Safety Precautions