Filter
Top Products
First-Time Operation (continued)
9
2. Attach a power supply.
A. Adapter/Charger
DC OUT Jack
To AC
100-240V,
50/60Hz.
POWER Indicator
1. Plug in adapter/charger. The adapter/charger’s POWER
indicator will light.
2. Connect power connector’s cable to DC OUT jack on
adapter/charger.
3. Hold power connector flush against camcorder and slide in
direction of arrow.
Power
Connector
B. Charged Battery*
1. Make sure camcorder’s
CAMERA/OFF/VCR
switch is in OFF.
2. Align battery with
camcorder. Hold battery
flush against camcorder,
and slide in direction of
arrow.
Details are on
pages 19-21.
(continued on next page)
Charged Battery
Attached to
Camcorder
*Battery must be charged before it can be
used the first time.