Filter
Top Products
42
Titler
The title can be displayed and recorded at any time. The built-in character register
contains 47 characters for creating titles on two lines with up to 16 characters per line.
Creating a Title
1. Attach a power source and place
CAMERA/OFF/VCR in CAMERA.
2. Place DATE/TIME/NORMAL/TITLE
in TITLE.
3. Press SET to move the flashing cursor
to the place you want to begin.
4. Select the first character by pressing
CHAR + or CHAR – until the character
you want appears. See the “Chart of
Characters” on the next page for the
characters available in the titler’s
register.
5. After you have selected the first
character, press SET to move the
flashing cursor to next position.
6. Repeat steps 4 and 5 until you have
completed the title.
Note: To correct a character, press SET to
place the cursor over it and then press
CHAR + or CHAR – to enter the correct
character.
If you want to delete a character, press
CHAR + or CHAR – until the blank space
appears.
7. Press ON/OFF to store the title and
remove it from the viewfinder when
you are finished.
Important Note: Place TIME/DATE/
NORMAL/TITLE in NORMAL to remove the
titler graphics from the viewfinder for normal
recording.
Delete a Title
Display the title and press SET to place
the cursor over the character you want to
delete. Then press CHAR + or CHAR –
to enter the blank space (-). Press SET to
place the cursor over the next character
you want to delete and enter the blank
space (-). Continue until all the
characters are deleted.
FADE
B.LIGHT
EDIT–
D•S•E
EDIT+
A/M FOCUS
AUTO
A/V
IN
OU
BATT EJECT
TE/
TIME
NORMAL
TITLE
ON/OFF
OSD
VCR
REC
SCENE SELECT
SET ON/OFF
DATE/
TIME
NORMAL
TITLE
RESET Z/MEMORY
OSD
CHAR–
CHAR+ SET ON/OFF
–
DATE/TIME/NORMAL/
TITLE in TITLE
SET
ON/OFF
CHAR (Character)
– and +
CAMERA/OFF/VCR Switch
(Located on Other Side)