Filter
Top Products
Checking Battery Power (Battery Level Indicator)
The battery level indicator shows how much recording time is left on the battery.
This indicator will not be recorded on the tape.
Powering Your Camcorder (continued)
21
Proper Care and Storage of Your Battery
Using the Battery to Power Your Camcorder (continued)
Display in Viewfinder
Battery
Level
Indicator
(continued on next page)
Caution: The camcorder will shut off
when the battery reaches empty. The
battery should still eject the cassette
when you slide TAPE EJECT. If it does
not, do not attempt to force the cassette
compartment open. This will damage
the camcorder.
Wait at least three seconds after
attaching the battery before inserting a
cassette.
• When the battery is fully charged, the
display shows in the viewfinder.
• After several minutes, the display shows
.
• When the battery level display
starts flashing, it is time to recharge the
battery.
Do not operate the battery at temperatures
below 14°F (–10°C) or above 95°F
(35°C). The battery may be damaged if
operated at temperatures above 122°F
(50°C). Operation time will decrease at
extremely low temperatures.
Charge the battery at a temperature of
32°F-95°F (0°C-35°C) to prevent
damage.
After repeated chargings and use, the
operation time will gradually decrease.
When operation time becomes too short
to be useful, it is time to replace the
battery.