Filter
Top Products
41
FADE
B.LIGHT
EDIT–
D•S•E
EDIT+
A/M FOCUS
AUTO
A/V
IN
OU
BATT EJECT
TE/
TIME
NORMAL
TITLE
ON/OFF
OSD
VCR
REC
SCENE SELECT
SET ON/OFF
DATE/
TIME
NORMAL
TITLE
RESET Z/MEMORY
OSD
CHAR–
CHAR+ SET ON/OFF
–
0:00:00
Time Counter
In Viewfinder
Minutes
Seconds
Hours
Time Counter
The time counter shows actual time elapsed when recording or playing back a
tape. It helps you quickly locate the end of recorded segments.
55/EDIT –
DATE/TIME/NORMAL/TITLE in NORMAL
RESET
/B.LIGHT
OSD
Z (Zero)/MEMORY
To Use Time Counter
1.Place CAMERA/OFF/VCR in VCR.
2.Place DATE/TIME/NORMAL/TITLE in
NORMAL.
3.Press OSD (DISPLAY on remote) to
display the time counter in the
viewfinder.
4.Insert the cassette, and press
55/EDIT – (55 REW/SCAN on remote)
to rewind the tape.
5.Press RESET to reset the time counter
to 0:00:00.
6. Press 66/EDIT + (66 F.FWD/SCAN
on remote) and fast forward the tape
until the time counter reads the amount
of time of your recorded segment. For
example, 0:10:00 will appear for ten
minutes.
7. Press /B.LIGHT (STOP on remote)
to stop the tape. This is the
approximate end of your recording.
8.Press OSD to remove the time counter
from the viewfinder.
Notes: If you rewind the tape farther back
than a counter reading of “0:00:00”, a minus
will appear in front of the counter.
The time counter is automatically reset to
“0:00:00” each time a cassette is inserted.
66/EDIT +
It will not be recorded on the tape.
CAMERA/OFF/
VCR Switch
(Located on
Other Side)
WW
TT
PAUSE
F.FWD
PLAY
REW
SCAN
STOP
VCR REC
TITLE
STANDBY
CAMERA
RECORD
ON/OFF
DISPLAY
ZOOM
DISPLAY
66 F.FWD/SCAN
55REW/
SCAN
STOP