Filter
Top Products
Optional Accessories
63
CRF81 RF Output Adapter
This adapter is used to connect your
camcorder to a standard TV (one without
audio/video input jacks) for playback. If
your antenna cable is the flat twin-lead
type attached by two screws, you will also
need a 300-75 ohm transformer, such as
193983. If your TV has 300-ohm VHF
screw terminals, you will need an optional
75-300 ohm transformer, such as AH011.
VAA008 Audio/Video Input Cable
This audio/video input cable will enable
you to use your camcorder to record from
other devices which have audio/video
output jacks (such as another VCR,
camcorder, or TV monitor). This makes
it convenient to copy tapes or record a
television broadcast. The VAA008’s plug
is specially designed so other cables and
accessories can be plugged into the
camcorder at the same time.
AVS80 Synchro Edit Cable
This cable attaches to the camcorder to
provide video and audio outputs for
dubbing, or for direct input to a monitor
receiver. It can also control the start/stop
functions of a VCR with a compatible
2.5mm PAUSE, EDIT, EDIT IN, EDIT
IN/OUT, or SYNC jack when copying a
tape.
193983 Cable Transformer
The 193983 is used to connect a standard
300-ohm antenna twin-lead to a standard
round 75-ohm connector on the RF output
adapter, a VCR, or TV.
AH011 Cable Transformer
The AH011 is used to connect a standard
round 75-ohm antenna cable to the
300-ohm screw terminals on a TV.
All specifications and descriptions of
accessories are subject to change
without notice.
AH25 Y-Adapter
This Y-adapter allows you to connect
your camcorder’s mono audio cable to a
stereo TV or VCR.