Filter
Top Products
2
30
Getting Started
2 Face the A mark on the
battery towards the lens, and
insert the battery until it locks
into place.
To remove the battery, push the
battery lock lever in the direction
of 2.
3 Close the battery/memory
card cover.
t Memo
• The battery level may not be displayed properly if the camera
is used at low temperatures or when performing Continuous
Shooting for a long time.
• Battery performance temporarily decreases as the
temperature decreases. When using the camera in cold
climates, have extra batteries at hand and keep them warm
in your pocket. Battery performance will return to normal
at room temperature.
• Have extra batteries ready when traveling overseas, or taking
a lot of pictures.
We recommend the use of the optional AC adapter kit K-AC128
when using the monitor for a long time or when connecting
the camera to a computer or AV device.
1 Make sure that the camera is turned off.
2 Open the battery/memory card cover.
Remove the battery if it is inserted in the camera.
3 Pull out the connection cable
cover (1) on the right side of
the battery/memory card
cover.
4 Insert the DC coupler into
the battery chamber.
5 Close the battery/memory
card cover.
Make sure that the connection
cable comes out from the
connection cable cover section.
2
Using the AC Adapter
1
e_kb558_om.book Page 30 Tuesday, September 16, 2014 11:59 AM