Filter
Top Products
3
52
Shooting
The control panel reappears.
4 Press F.
The camera returns to standby mode.
If you selected g or h in Step 3, proceed to Step 5.
5 Press and hold E.
6 Select the AF area.
Use the frame that appears on
the monitor to change the
position and size of the AF area.
Available operations
7 Press E.
The AF area is set.
u Caution
• When f is selected, the focus lock operation (composition
adjustment with the half press of 0) does not work.
t Memo
• When set to j, the number of faces detected can be
confirmed by the number of lit grip lamps (0 to 5).
• To change the setting from the menu, set in [Contrast AF]
of [Live View] in the A3 menu.
• When [Focus Peaking] is set to [On] in the control panel or
[Live View] of the A3 menu, the outline of the subject in
focus is emphasized and makes it easier to check the focus.
This function works in both v and w modes.
h
Select Sets the focusing area by the pixel.
i
Spot
Sets the focusing area to a limited area
at the center.
ABCD
Changes the position of the AF area.
V
Increases/reduces the size of the AF
area (when g is selected).
M
Returns the AF area to the center.
OK
OK
e_kb558_om.book Page 52 Tuesday, September 16, 2014 11:59 AM