Filter
Top Products
149
Changing Camera Settings
3
Changing the Startup Settings
(START SETTING)
To change the power-on setting using one of the current my settings,
follow the steps below.
1.
Display the setup menu.
For the operating procedure, see P.123.
2.
Press the " button to select [START SETTING] and press
the $ button.
3.
Select [SETTING 1] or [SETTING 2]
and press the M/O or #
button.
If you do not use the My Setting function,
select OFF in step 3.
4.
If the # button was pressed in
Step 3, press the M/O
button.
5.
Turn your camera off.
The settings to be used at the next power-on will be changed.
Note
• When [START SETTING] is set to OFF, settings are retained as usual. (P.190)
• When [START SETTING] is set to [SETTING 1] or [SETTING 2], the camera settings made
with the My Setting function are used at power-on even if [RESTORE DEFAULTS] is
selected.
Settings Retained by My Setting Function
PIC QUALITY EXPOSURE COMP.
FOCUS WHITE BALANCE
Focal distance used in Manual Focus mode ISO SETTING
PHOTOMETRY FLASH
CONT. MODE Scene Mode
IMG SET Macro
IMAGE WITH SOUND DENSITY
DATE IMPRINT DISP. Mode