Filter
Top Products
189
B. Recommended Parts
Recommended external flashes are as follows:
When using a recommended flash, follow the steps below.
1.
Select FLASH OFF as the flash mode of the built-in flash.
(P.44)
2.
Turn off the camera and flash.
3.
Attach the external flash to the hot shoe on the camera.
4.
Turn on the external flash.
5.
Turn on the camera.
6.
Make sure that the external flash
icon is displayed on the LCD
monitor.
Caution
If the internal flash is set to other than [Flash Off], the internal flash cover may be lifted even
when an external flash is attached.
Note
• When the external flash icon is displayed on the LCD monitor, the built-in flash does not go
on.
• If the camera does not recognize the external flash, turn off the external flash and camera,
detach the external flash, and attach it again.
Distributor Product name Model name
Sigma EF-500 DG SUPER SA-STTL
Sigma EF-500 DG ST SA-STTL