Filter
Top Products
22
If you are using the camera for the first time, read this section.
Eye-Fi Cards ---------------------------------------------------------------------------
Eye-Fi X2 series cards (SD memory cards with built-in wireless LAN function) can
be used. For more information on Eye-Fi cards, access the Web page of Eye-Fi
(http://www.eye.fi/).
Caution ---------------------------------------------------------------------------------
• If an SD memory card is loaded, the camera does not record to the internal
memory, even if the card is full.
• Take care not to get the contacts of the card dirty.
• This product is not guaranteed to support Eye-Fi card functions (including
wireless transfer). In case of an issue with an Eye-Fi card, please check with the
card manufacturer. Also, Eye-Fi cards can only be used in the country in which
the cards were purchased. If it is unclear whether the card has been approved
for use in the area, please check with the card manufacturer.
Write-protecting your images ----------------------------------------------------
Move the write-protection switch on the SD memory card
to LOCK to prevent your still images from being accidentally
erased or the card from being formatted.
Note that you cannot shoot images on a locked card because
no data can be recorded to the card. Unlock the card before
shooting.
Charging the Rechargeable Battery
Charge the battery before use.
The battery can be charged by
connecting it to a USB power adapter
connected to an AC power outlet, or by
connecting it to a computer. In either
case, turn the camera off and connect
the supplied USB cable to the camera
USB/AV OUT terminal.