Filter
Top Products
Make sure that the image is inside the page displayed.
Open the [Document Setup] and remove the check from the [Use Print Setup] and then open the
[Properties] by clicking the [PageSetup].
We will devide the data in half so we will set
the [Length] to the half of the size of the cur-
rent size and press OK button.
Select [Tile Imageable Areas]
and click OK button.
Make sure to always select [FormFeed] when
printing tile page.
And if there is cutting data,
select [Cutting] and set the suitable [Process]
depending on data.
Click OK button after completing the above settings.