Filter
Top Products
103
Wireless Connection
When registering the wireless print adapter, make sure it is
within 1 meter of the camera.
If the registration fails, please refer to List of Messages
(p. 115).
You can register up to 8 adapters with the camera.
2
Slide the mode switch to (playback)
(Wireless) Menu [Reg. Target Device].
See Menus and Settings (p. 32).
3
When the message “Press the SETUP but-
ton” is displayed in LCD monitor, press the
wireless print adapter’s SETUP button
within 10 seconds.
The message “Regis-
tration completed” will
appear on the LCD
monitor.
The newly registered
wireless print adapter
will be displayed on
[Target Device] as
[2.WA-1]. Subsequent
wireless print adapters
will be displayed as
[3.WA-1], [4.WA-1] and so on.
4
Press .