Filter
Top Products
41
ADVANCED
SELF-TIMER( )/ UP( )button
When the menu is displayed on the LCD monitor, pressing the
UP button ( )makesthemenu cursor move up.
When the menu is not displayed on the LCD monitor, the
LEFT ( )buttonoperates as the SELF-TIMER button in
RECORDING(STILL IMAGE/ MOVIE) mode.
This function is used when the photographer would also like to
be in the image.
Selecting the self-timer
The self-timer activates only in RECORDING(STILL IMAGE/
MOVIE CLIP) mode.
Use a tripod or place the camera on a stable surface.
1. Do not turn the LCD monitor off.
2. Select RECORDING(STILL IMAGE/ MOVIE CLIP) mode by rotating the mode dial.
3. If the self-timer indicator is displayed on the LCD monitor by pressing the SELF-TIMER button, the
setting is completed.
Press the self-timer button again, and the self-timer is canceled.
4. Pressing the shutter button will allow an interval of ten seconds before the image is taken. After that,
the self-timer is cancelled.
If you select [MANUAL] sub menu in [TIME] MOVIE CLIP mode menu, the movie clip can be
recorded as long as the memory allows. To stop the recording, press the shutter button.
RECORDING MODE
THUMBNAIL/ LEFT( ) button
In RECORDING(STILL IMAGE, MOVIE CLIP) mode, there are no functions in the LEFT( )button.
When the menu is not displayed on the LCD monitor, pressing the RIGHT( )button activates as a
Thumbnail button.
You can view 9 images at a time on the LCD monitor in thumbnail mode.