Samsung Digimax 201 Digital Camera User Manual


 
56
PLAY MODE
Setting up the play back function by using the camera button
You can set up the PLAY mode function by using the camera buttons.
Power switch
Used for turning the camera power on / off.
The camera power will be turned off automatically during periods of inactivity. This is done to reduce
battery drain. The camera can be reactivated by sliding the power switch again.
LCD button
Pressing the LCD button in the PLAY mode will change the display as shown below.
You can check the image information(image size, recording date, time, flash) in the [image & basic
information] display.
Ex ) SIZE : 1600x1200 Image size DATE : 2002/09/01 Recording date
TIME : 13:24:07 Time FLASH : FIRED FIRED
SIZE : Image size
DATE : Recording date
TIME : Time
FLASH : Using a flash
image & full information
image & basic information
Pressing the
LCD button
Pressing the
LCD button