Filter
Top Products
Othe_ settings
HDMI FV Out
You can set the HDMI video output to match the l-V you haw_
connected tile camcorder to.
1 Press the Home (_.) button _ touch "Settings" _ "Display"
"HDMI TV Out",
2 Touch the desired submenu item,
>>"aM!!VO='....
3 To exit the menu, touch the Return (_) tab.
Auto: The video signals are output in the same format as the recorded
file. Use this setting only when connecting to an HDTV.
° 480p: The recorded file is output in the 720x480p format. Use this
setting only when connecting to astandard and analog TV which
supports SD (Standard Definition) progressive scan (480p) signals
through its HDMI jacks.
Auto LCD Off
You carl set the LCD screen to darken automatically when there
is no user interaction for a period of time to decrease power
consumption.
Press the Home (t_) button _ touch "Settings" _ "Display".
2 Touch tile desired item nexl to "Auto LCD Off".
> Display i
Date/Time Display >
TV Display
3 To exit the menu, touch the Return (_) tab.
OFF: Disables the function.
ON: When the camcorder is idle for more than 2 minutes in the STBY
mode, or for more than 5 minutes when recording a video, the
power saving mode starts by dimming the LCD screen.
[_] • When the "Auto LCD Off" function is enabled, you can press any
button on the camcorder to return LCD brightness to normal.
Auto LCD Off is disabled in the following cases:
- When the camcorder has a cable connection. (USB cable, AC
power adaptor, etc.)
- While the Demo function is in operation.