Filter
Top Products
To insert a memory card
1. Open the memory card cover by sliding
the OPEN/CLOSE switch toward OPEN.
2. Insert the memory card into the card slot
until it softly clicks.
Make sure that the camcorder is
placed as shown above and the term-
inal portion of the card is facing up.
3. Close the memory card cover by sliding
the OPEN/CLOSE switch toward CLOSE.
•
To eject a memory card
1. Open the memory card cover by sliding
the OPEN/CLOSE switch toward OPEN.
2. Gently push the memory card to eject it.
3. Close the memory card cover by sliding
the OPEN/CLOSE switch toward CLOSE.
INSERTING / EJECTING A MEMORY CARD
(NOT SUPPLIED)
To avoid data loss, turn off the camcorder by pressing the Power ( ) button for one second
before inserting or ejecting the memory card.
Be careful not to push the memory card too hard. The memory card may suddenly pop out.
•
•
Your camcorder supports only SD (Secure Digital) and SDHC (Secure Digital High Capacity) cards.
Card compatibility may vary depending on the manufacturer and the type of memory card.
getting ready to start recording
28
Terminal portion