Filter
Top Products
112
Please check the following.
The camera doesn’t switch on.
• There is low battery capacity.
Insert fresh batteries. (p.
15
)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera power ceases while in use.
• The battery is exhausted.
Insert fresh batteries.
• The Camera is turned off automatically.
Turn on the camera power again.
• Operation has ceased in a low temperature outside of the camera
usage temperature range.
Remove the battery from the camera and warm both battery and
camera by placing them in your pocket, etc. and then immediately
before shooting, place the battery in the camera and then shoot.
Before contacting a service centre
Camera does not take images when pressing the Shutter button.
• There is insuffi cient memory capacity.
Delete unnecessary image fi les.
• The memory card has not been formatted.
Format the memory card (p.89).
• The memory card is exhausted.
Insert a new memory card.
• The memory card is locked.
Refer to [Card Locked!] error message.
• The camera’s power is off.
Turn the camera power on.
• The battery is exhausted.
Insert fresh batteries. (p.15)
• Battery is inserted incorrectly with the polarities reversed.
Insert the battery according to the polarity marks (+, -).
The camera suddenly stops working while in use.
• The camera stopped due to a malfunction.
Remove /re-insert battery and switch the camera on.
The camera buttons do not operate.
• Camera malfunction.
Remove/re-insert battery and switch the camera on.