Filter
Top Products
104
2. Using a Network-Connected Machine
Wired network setup
You must set up the network protocols on your machine to use it on your
network.
You can use network after connecting network cable to a corresponding port on
your machine.
For models that do not have the display screen on the control panel, use the
SyncThru™ Web Service or SetIP program.
• See "Using SyncThru™ Web Service" on page 184.
• See "Setting IP address" on page 105.
4
Printing a network configuration report
You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
Press the (Cancel) button for more than 4 seconds on the control panel.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 192.0.0.192