《11》
Connecting to a Power Source
■You can charge the rechargeable battery (SLB-0837) by using the cradle.
■How to charge the rechargeable battery (SLB-0837)
● Charging with the cradle
● Charging with the camera
Charging LED
■ Charging LED of the AC Adapter
● If you insert the fully discharged battery to charge it, do not turn on the camera at
the same time. The camera may not be turned on because of the low battery
capacity. Charge the battery for more than 10 minutes before using the camera.
● Do not use the flash frequently or take a movie clip with the fully discharged
battery charged for a short time. Even if the charger is inserted, the camera
power may be turned off because the rechargeable battery is discharged again.
● When you charge the battery with the cradle, you only can use Lithium Ion
battery pack (SLB-0837).
Charging LED
Being Charged Red LED is on
Charging is complete Green LED is on
Charging error Red LED is off or blinking
● Before inserting any cables or AC adapter, check the directions and do not
insert by force. It may cause breakage of cable or camera.
● If the charging LED of the AC Charger does not turn on or blink after
inserting the rechargeable battery, please check whether the battery is
inserted correctly.
● If you charge the battery with the camera power on, the battery can't charge
fully. Turn the camera off while charging the battery.
CAUTION
Being discharged
(Using the AC adapter)
Orange coloured LED is on