《32》
Capture:SH
Move:
Capture:SH
Move:
● Moving and changing the focus frame
You can change the focus frame after selecting a Range
menu.
1. Press the +/- button after selecting a preset focus
frame.
2. Press the Up/ Down/ Left/ Right button to move the
focus frame position.
3. To select the focus frame position, press the +/- button
again and you can take a picture.
[The frame is activated]
[After changing the frame position]
Capture:SH Edit:+/-
E (Effect) button
HighLight HighLight HighLight HighLight
■ You can make the subject stand out from its surroundings. The subject will be
sharp and in focus while making the rest out of focus.
1. Press the E button in the available camera modes
with the exception of Movie clip and Auto mode
and select the menu.
2. Select a desired sub menu by pressing the
Up/ Down button and press the OK button.
Preset focus frames
HighLight
[Range 1] [Range 2] [Range 3] [Range 4]
Capture:SH Edit:+/-
3. The preset focus frame will appear.
Press the shutter button to capture an image
◀▶
◀
▶
◀▶
◀
▶