Samsung NV3 Digital Camera User Manual


 
28
ISO : You can select the ISO sensitivity when taking pictures.
The speed or specific light-sensitivity of a camera is rated by ISO numbers.
Selecting an ISO Sensitivity
1. Press the +/ - button, and then use the UP and
DOWN buttons to select the ISO icon( ).
The ISO menu bar will appear as shown.
2. Use the LEFT and RIGHT buttons to select the
desired ISO sensitivity value.
- AUTO
: The camera's sensitivity is automatically changed by variables such as
lighting value or subject brightness.
- 80, 100, 200, 400, 800,1000
: You can increase the shutter speed while the same amount of light is
present, by increasing the ISO sensitivity. However, the image may be
saturated in high luminance.
The higher the ISO value, the higher the camera’s sensitivity to light and
therefore the greater its capacity to take pictures in darker conditions.
However, the noise level in the image will increase as the ISO value
increases, making the image appear coarser.
3. When you press the +/ - button again, the value you set will be saved and ISO
setup mode will end.
+/- button
When special effect (colour) from the icon other than is selected, it will
not be able to select the RGB.
RGB : Allows the user to adjust the R (Red), G (Green), and B (Blue) values of
the images to be captured.
Setting RGB Values
1. Press the +/ - button, and then use the UP and DOWN
buttons to select the RGB icon ( ).
The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons
to select the desired RGB value.
- Up/ Down Button : Navigates between R, G,
and B icons.
- Left/ Right Button : Changes value of each icon.
3. When you press the +/ - button again, the value you
set will be saved and RGB setup mode will end.