Filter
Top Products
English – 11
ENG
Installation
⑤ After hooking the safety cable on the hole of
pipe [1], attach the upper housing to wall mount
bracket by turning it at least seven turns [2]. To
fi x the upper body orientation, turn the handle of
double nuts to clockwise tightly [3].
⑥
Open the dome cover to install the PTZ camera
mechanism. Care must be taken dome cover is
hung by internal safety cable properly. Plug fan/
heater cables into the connectors in the housing.
⑦ Plug the connector of cable from junction box
into properly. After checking the orientation
of one touch connector in the upper housing,
press the PTZ mechanism into hook in the
upper housing.
⑧ To lock the PTZ mechanism to the upper
housing, press the two black handles till it
sounds snap.
G