Filter
Top Products
6 – 36x SMART DOME CAMERA
Introduction
FEATURES
Camera Specifi cations
CCD Sensor : EX-view HAD
TM
CCD
Zoom Magnifi cation : × 36 Optical Zoom, × 12
Digital Zoom (Max × 432 Zoom)
Wide Dynamic Range Function
Day & Night Function : ICR(IR Cut fi lter Removal)
Various Focus Mode : Auto Focus / Manual Focus
/ Semi-Auto Focus.
Independent or Global camera settings for each
Preset locations.
Powerful Pan/Tilt Functions
Max. 360°/sec high speed Pan/Tilt Motion
Using Vector Drive Technology, Pan/Tilt motions
are accomplished in the shortest path. As a result,
time to target view is reduced dramatically and the
video on the monitor is very natural to watch.
Ultra low speed (0.05°/sec) enables operator
to locate camera to desired target view with
accuracy and ease.
Zoom-proportional pan/tilt speed helps operator
to move the camera easily.
Preset, Pattern, Auto Pan, Scan, Privacy
Mask, Schedule and More…
MAX. 127 Presets are assignable. All of them
have independent characteristics such as White
Balance, Auto Exposure, Label, Alarm Input/
Output and so on.
Max. 8 set of Auto Pan can be stored. This
enables to move camera repetitively between two
preset positions with designated speed.
Max. 4 of Patterns can be recorded and played
back. This enables to move camera to follow any
trajectory operated by joystick as closely as possible.
Max. 8 set of Scan action can be stored.
This enables to move camera repetitively with
combination of Preset or Pattern or Auto Pan. A
Scan is composed of max. 20 entities of Preset/
Pattern/Auto Pans.
Max 8 Privacy Masks can be set up to protect
privacy of other people.
7 rules of Schedule can be assigned by day and
time. Appropriate actions (such as Home, Preset,
Scan, Pattern and Auto Pan) can be defi ned for
each rule. Also, it is possible to use Weekday and
All days to simplify the rule.
❖
•
•
•
•
•
•
❖
•
•
•
•
❖
•
•
•
•
•
•
PTZ(Pan/Tilt/Zoom) Control
With RS-485 communication, max. 255 of
cameras can be controlled at the same time.
Pelco-D/ Pelco-P/ Samsung protocol can be
selected as a control protocol in the current
version of fi rmware.
OSD(On Screen Display) Menu
OSD menu is provided to display the status
of camera and to confi gure the functions
interactively.
The information such as Camera ID, Pan/Tilt/
Zoom/Direction, Alarm Input & Output, date/time,
current temperature and Preset can be displayed
on screen.
Each display item can be turned on or off
independently.
Alarm I/O Functions
8 alarm sensor Inputs and 4 relay output are
available.
To reject external electric noise and shock
perfectly, alarm sensor Input is decoupled with
photo coupler.
The signal range of sensor input is from DC 5.0 to
12.0 volts to adopt various applications.
If an external sensor is activated, camera can be
set to move to the corresponding Preset position.
Relay outputs can be assigned to work with a
certain preset.
Reserved Presets for Special Purpose
Most of camera settings are directly changed by
calling Reserved Presets, not entering into OSD
menu. For more information,refer to “Reserved
Presets”(page 15) in this manual.
❖
•
•
❖
•
•
•
❖
•
•
•
•
•
❖
•