Filter
Top Products
English – 21
ENG
How to use OSD Menu
Parking Action Setup
If Park Enable is set to ON, camera runs assigned
function automatically if there is no PTZ command
during assigned “Wait Time”.
Park Enable [ON/OFF]
Wait Time [5 sec ~ 4 hour]
The time is displayed with “hh:mm:ss” format and
you can change this by 1 sec unit.
Park Action
[HOME/PRESET/PATTERN/AUTOPAN/SCAN]
Ex) If HOME is selected for Park Action, camera
will move to home position when there is no PTZ
command during assigned “Wait Time.”
Alarm Input Setup
Match the Alarm sensor input to one of Preset
positions. If an external sensor is activated, camera
will move to corresponding preset position when this
item is predefi ned.
Alarm Type
[Normal OPEN(N.O) / Normal CLOSE(N.C)]
Sets sensor input type.
Alarm Action
[NOT USED/HOME/PRESET 1~128/APAN 1~8,
PATTERN1~4, SCAN 1~4]
For each Alarm input, you can assign counteraction
functions (Preset, Auto Pan, Pattern, Scan).
❖
•
•
•
❖
•
•
FUNCTION SETUP
Confi gure 5 Special Functions with this menu
Preset Setup
127 Presets from the number 1 to 128 can be
assigned excluding preset 95 reserved for Menu.
Auto Pan Setup
Up to 8 Auto Pans are available, which makes
camera to move slowly between two preset points.
Pattern Setup
Up to 4 patterns can be stored in the dome.
In this function, path data created by manual move
of Joystick are recorded and you can playback the
identical path automatically whenever required.
Scan Setup
Up to 8 Scans can be defi ned.
In a Scan, max 20 entities are assigned from any
combinations of Preset/Auto Pan/Pattern. If you run
a Scan, camera will execute each entry sequentially.
Schedule Setup
7 rules of Schedule can be assigned by day and
time. Appropriate actions (such as Home, Preset,
Auto Pan, Pattern and Scan) can be defi ned for
each rule. Also, it is possible to use Weekday and
Weekend in a rule to make it simple.
•
•
•
•
•
PARKING ACTION SETUP
PARK ENABLE OFF
WATT TIME 00:10:00
PARK ACTION HOME
BACK
EXIT
ALARM INPUT SETUP
ALARM1 N.0 PRESET1
ALARM2 N.0 NOT USED
ALARM3 N.0 NOT USED
ALARM4 N.0 NOT USED
ALARM5 N.0 PRESET1
ALARM6 N.0 NOT USED
ALARM7 N.0 NOT USED
ALARM8 N.0 NOT USED
BACK
EXIT
FUNCTION SETUP
<PRESET SETUP>
<AUTO PAN SETUP>
<PATTERN SETUP>
<SCAN SETUP>
<SCHEDULE SETUP>
BACK
EXIT