Filter
Top Products
Adjusting the image during recording
Explanation/Solution _: i : :_ .....
• Set "Focus" to "Auto." -page 70
Focusdoes not adjust o The recordingconditions are not suitablefor auto focus.
automatically. Adjust the focus manually. _page 70
• The lens is dusty on the surface.Clearthe lensand check the focus.
o This may occur when you make a recording undera fluorescent,sodium or
The image appearstoo bright or mercury lamp.
flickering,or changes incolor.
Cancel "Scene Mode (AE)" to avoid or minimize the phenomena. _page 65
Image'scolor balanceis not ,, White balanceadjustment is required.Adjustto the proper "White Balance."
natural. _page 66
Playback on your DVD camcorder
Symptom: :i :: : ....
. Press the MODE button to set to the Play mode.
Using the playback (Play/Pause) • Images recorded using another device may not be played on your DVD camcorder.
function does not start playing. ° Select a proper storage media. (SC-DX103/DX105 only) '-*page 30
• Check out the memory card compatibility. _page 52-54
The Skip or Search function does ,, If the temperature inside the camcorder is too high, it may not function properly.
not work properly. Turn the camcorder off, and turn it on again a little later.
Connecting/Dubbing with other devices (TV, DVD players, etc)
Symptom :Explanation/Solution: [ : ; ....
, Connect the audio of the audio/video cable to your camcorder or to the connected
You cannot view the image device (TV, DVD recorder, etc). (Red color- right, White color- left)
or hear the sound from the
o The connection cable (AV cable) is not connected properly. Make sure that the
connected device.
connection cable is connected to the proper jack. _',pages 86-87
• This happens when viewing an image recorded in 16:9 wide mode on a 4:3 TV,
The image appears distorted on if you want to display properly on your TV, check out your TV type and set the
a 4:3 TV.
proper screen mode ("16:9 Wide") before recording. _page 72
You cannot dub correctly using • The AV cable is not connected properly. Make sure that the AV cable is connected
the AV cable, to the proper jack, i.e. to the input iack of the device used for dubbing images from
your camcorder. _page 88
English _109