Filter
Top Products
BASIC DVD CAMCORDER OPERATION
Turning the DVD camcorder on and off
You can turn the camcorder on or off by sliding the POWER switch down.
Selecting the operating modes
• Set the operation mode by adjusting the Storage mode switch (SC-DX103/DX105 only)
and MODE button before recording or operating any functions.
1. Set the Storage mode switch to DISC or CARD. (SC-DX103/DX105 only)
DVD camcorder mode: To record movie on a DVD disc. _page 33
Digital camera mode: To record movie or photo images on a memory card.
'mpages 56-57
2. Press the MODE button to set Record(6) or Play(_) mode. Each press of the MODE
button toggles between the Record(_) mode and Play(:_) mode.
_} hen the DVD camcorder is turned on, the self-diagnosis function operates and a
message may appear. In this case, refer to warning indicators and messages (on
pages 103-105) and take corrective action.
When using this camcorder first time
,, When you use your DVD camcorder for the first time or you reset it, you will see the
"Date/Time Set" screen for the startup display. If you do not set the date and time
the "Date/Time Set" screen appears every time you turn on your camcorder.
<DVDcamcorderrecordmode>
<DVD camcorder play mode>
Engtish 21