Filter
Top Products
DUBBING IMAGES FROM THE CAMCORDER TO A VCR OR DVD/HDD RECORDER
You can dub images played back on this DVD camcorder onto other video
devices, such as VCRs or DVD/HDD recorders. Use the provided AV cable to
connect the DVD camcorder to another video device as shown in the following
figure:
1. Slide the POWER switch downwards to turn the power on, then open the
LCD screen. _page 21
o Set the appropriate storage media. (SC-DX103/DX105 only)
_page 30
2. Press the MODE button to set the Play mode.
3, Use the Joystick to select the recorded (dubbed) image in the thumbnail
index view, then press the Joystick.
4, Press the record button on the connected device.
o The DVD camcorder wi!l start playback and the recording device will
dub it.
®
VCRs or DVD/HDD recorders
Signal flow
AV cable
o Refer to "Editing chapter" to create a playlist by selecting desired scenes from those recorded on this DVD
camcorder. _pages 40-46
• Audio is heard from the speaker. If the volume is too high, noise may enter the dubbed image.
o Be sure to use the AC power adaptor to power the DVD camcorder to prevent battery power from shutting
off during recording on another video device.
88_ English