Filter
Top Products
DISC UNFINALIZE
o
o
This function works only in the Record mode. _page 21
if a DVD-RW disc had been finalized in the VR mode or Video mode, you can unfinalize the disc for further
recording. When unfinalizing, there should be enough power in the battery. If the AC power adaptor is to be used,
make sure that the jack is properly connected.
1. Slide the POWER switch downwards to turn on the power. _.,page 21
2. Set the Storage mode switch to DISC. (SC-DX103i DX105 only) -page 30
3. Press the MENU button, then move the Joystick right or left to select "Disc Manage."
4. Move the Joystick up or down to select "Disc Unfinalize," then press the Joystick,
. You can simply unfinafize the disc using the FINALIZE button on the DVD camcorder.
• Disc information will appear.
5. Move the Joystick to select "Execute," then press the Joystick.
• To exit, use the Joystick to select "Back," the press the Joystick.
6. The message "Make the disc recordable?" will appear. Move the Joystick right or left
to select "Yes," then press the Joystick.
o The message showing that the disc is being unfinalized will appear, and the disc will
be unfinalized.
//_o The unfinalize function is not available when the battery level is less than ((_).
WA,,_N_° During unfinalizing, do not cause impact or vibration to your DVD camcorder.
This could cause a malfunction.
English _49