Filter
Top Products
Connecting to a computer
Symptom i
Thecomputer does not recognize
your camcorder.
Cannot play a movie fileproperly
on a PC,
The imageor sound on your
camcorder is not playedon your
computer properly.
The playbackscreenis pausedor
distorted.
o Disconnectanyother USB devicethan the keyboard, mouse and camcorder from
the computer.
• Disconnectthe USBcable from the computer and camcorder,restartthe
computer,then connect it again correctly.
o You can not use the camcorder in DVD camcorder mode with a Macintosh.
• Make sure you insert the connector in the correct direction, and connect the USB
cable to the USB jack on your camcorder firmly.
o Disconnect the cable from the computer and camcorder, restart the computer.
Connect it again properly.
• Movie playback or sound may stop temporarily depending on your computer.
The movie or sound copied to your computer is not affected.
• If your camcorder is connected to a computer that does not support hi-speed
USB(USB2.0), the image or sound may not be played correctly. The image and
sound copied to your computer are not affected.
° Check the system requirements to play a movie. _page 90
o Exit other all applications running on the current computer.
o If a recorded movie is played on your camcorder connected to a computer, the
image may not play smoothly, depending on the transfer speed. Please copy the
file to your PC, then play it back.
110_ English