Filter
Top Products
Starting the recording mode
Howto usethe Pro rammode o-.
Selecting the automatic mode will configure the camera with
optimal settings. You can still manually configure all functions
except the aperture value and shutter speed.
1. Select the Program mode by pressing
the MENU button (p.19).
2. Press the Menu button to configure
advanced functions.
How to usethe DIS mode
Digital Image Stabitisation (DIS) mode.
This mode will reduce the effect of camera shake and help you get
a well-exposed image in dim conditions.
1. Select the DIS mode by pressing the
MENU button. (p.19)
2. Point the camera towards the subject
and compose the image by using the
LCD monitor.
3. Press the Shutter button to capture an
image.
[] The submenus for the functions are as follows:
EV p.34 Metering p.39
White Balance p.35 Drive p.40
ISO p.36 Focus Area p.40
Face Detection p.36 Photo Style Selector p.41
Photo Size/ Movie Size p.38 image Adjust p.42
Quality / Frame Rate p.39 Voice p.43
[] Things to watch out for using the DIS mode
1. The digital zoom wilt not operate in the DIS mode.
2. If the lighting condition is brighter than fluorescent lighting
conditions, the DIS will not activate.
3. If the lighting condition is darker than in fluorescent lighting
conditions, camera shake warning indicator ( "_k__ ) will display.
For best results only take pictures in situations where the
camera shake warning indicator ( _ ) is not displayed.
4. If the subject is moving, the captured image may be blurred.
5. As the DIS uses the camera's digital signal processor, it may
take a little longer for the camera to process and save the
images.
20