Filter
Top Products
Display ( _ )
Start
Quickview
You can select the image that is first displayed on the LCD monitor
whenever the camera is turned on.
- Sub menus :[Off]*, [Logo], [User Image]
- Use a saved image for the start-up
image with the [Start Image] in the
[Resize] menu in the play mode.
- The start-up image will not be deleted by
[Delete] or [Format] menu.
- The User images will be deleted by
[Reset] menu.
If you enable Quick View before capturing an image, you can view
the image you just captured on the LCD monitor for the duration
set in the [Quick View] setup. Quick view is possible only with still
images.
- Sub menus
[Off] : The quick view function can't
be activated.
[0.5 sec]*, [1sec], [3 sec]
:The captured image is briefly
displayed during the selected
time.
You can adjust the LCD brightness.
- Sub menus :[Auto]*, [Dark],
[Normal], [Bright]
SAVE
If you set the [Power Save] to On and the camera isn't operated
during the specified time, the LCD monitor will be turned off
automatically.
- Sub menus
[Off]*:The LCDmonitorwill not beturnedoff.
[On] : If the camera isn't operated
during the specified time (about
30 SEC.), the camera power wilt
be idle (Camera status tamp:
Blinking) automatically.
You can't set the [Power Save] menu of Playback Mode.
47